|
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28
|
|||
|
Tweaking the elevation
|
|||
| Once you've hit a max signal with azimuth adjustments, move to elevation. Take one hand and press out/up on the bottom of the dish, and watch the OPI. If the signal goes up, make a small adjustment with the elevation tool. If the signal goes down, pull back on the bottom of the dish and if the signal goes up, make a lowering adjustment. Push, pull until you it max signal. Sometimes you'll have to do a small adjustment to skew, but in my experience, not often. |
