|
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28
|
|||
|
Back at the computer
|
|||
| Once you've peaked the signal, tighten up the nuts for azimuth and elevation, and make sure that the dish settings cannot change for any reason, then come back to the computer. You should see about the same signal you did on the OPI, plus or minus a bit. On SatMex5, you'll see numbers like what is displayed above, but several of the satellites will have numbers much lower. What you're looking for is the max number for your satellite. |
