|
Well, I'm making progress. The 10/2 to the main has now been disconnected
and pulled out of the ATS. The 12/2 AC wires have been pulled out
and are ready to put into a junction box that will be attached to
the top of the compartment. Remember. One of these comes from the
Main Breaker box and the other goes to the Rear AC. Because we no
longer need the split power situation we will feed the rear AC from
the Main Breaker box. To be accurate about it we'll feed it from
the top buss and the bottom buss will feed the front AC.
So now I've got these extra 10/2 wires that run to the main breaker
that are not used for anything. My thought is that the electricity
can now run from the Main back to here. I don't have a receptacle
on the drivers side of the MH, so why not install one? The wires
are here, right? Go to the next picture. NEXT
|