|
On our GenSet the breakers are on the right end. In the original
configuration there was the top one, a 30 amp and below that was
a white 20 amp. At this point I've already changed the breaker out.
Why? Well in the 50 amp configuration the GenSet will not feed the
Main and Rear AC. It will feed the top and bottom buss of the Main.
How much power from a Emerald 6500. According to the tech guy at
Onan it will really put our about 7200 watts. In most cases I can
expect to get about 25 amps per side for a total of around 6000
watts. Give or take a few watts.
NEXT
|